Automatic Arm Car Jet Wash with Dryer Plant

£0.00

In Stock

An Automatic Arm Car Jet Wash Plant with Dryer is a touchless or brush-based commercial vehicle cleaning system designed to wash and dry cars automatically with minimal human labor.

Category:

Description

Key Features & Technology

  • Touchless / Arm Mechanism: Uses an overhead carriage or revolving/swing arm (single or double arm) that rotates 360° around the vehicle to apply water, soap, and wax without physical brushes touching the paint, reducing the risk of scratches.
  • Integrated Dryer System: Equipped with high-efficiency air blowers and contour-following fans that dry the vehicle shape automatically after washing.
  • Underbody & Wheel Wash: Features fixed or robotic oscillating nozzles built into the floor/gantry to blast mud and grime from the car chassis and wheel arches.
  • Smart Automation: Controlled via a PLC (Programmable Logic Controller) and HMI.

Technical Specifications

Structure MaterialHeavy-duty hot-dip galvanized steel frame
Nozzle / Operating Pressure150 Bar / 24–40 bar
High-Pressure PumpTriple ceramic plunger pump
Water Flow Rate40–42 litres per minute
Water Consumption100 to 140 litres per vehicle
Power Supply3-Phase, 415V / 380V, 50Hz
Total Connected Load11 kW to 15 kW
Power Consumption~0.6 to 1.0 kWh (units) per car
Cycle Duration6 to 8 minutes

Typical Workflow

  • Underbody Washing: High-pressure oscillating nozzles clean the chassis underneath.
  • Foam / Chemical Application: Automatic mixing and spraying of shampoo or lava foam.
  • High-Pressure Jet Wash: 360° rotating arms deliver high-pressure water jets (ranging from 24 to 150 bar depending on the model) to strip away dirt.
  • Wax Application: Liquid wax is applied for a protective gloss.
  • Profile Air Drying: Built-in high-power fans complete a touch-free dry.

General Technical & Operational Specs

  • Wash Cycle Time: Around 3.5 to 9 minutes per vehicle (depending on whether drying and wheel-arch washing are included).
  • Water Consumption: Roughly 65 to 125 liters per car, with optional water-recycling systems available for better eco-efficiency.
  • Power & Supply: Typically requires a 3-phase, 415V, 50Hz electrical connection with total connected loads around 9–15 kW.
  • Build Structure: Hot-dip galvanized steel or stainless steel frame treated with powder coating to resist rust and moisture in a high-humidity wash bay.